A quick way to find out the current speed is to run CPU-Z. Click on the Memory tab and it will tell you the current speed – next to DRAM Frequency – of your RAM. This will probably be around half the speed you were expecting to see, but that’s because it’s DDR memory. DDR stands for double data rate, so the effective speed is twice the The way I did this, was to remove the extra ram. get all the memory cl settings from intel xtu - I used version 6.5.1.355. Then reinstalled the extra memory, went into the bios and added a custom profile with those settings . Windows now sees all 4 sticks running at 3200Mhz Task manager displays default info based on the info provided by the manufacturer, not real one. Not true, mine shows 2800 MHz in Task Manager, and it`s default speed is 2133, like most high speed ram. Faith, there is nothing wrong with having 2 XMP profiles, I bought 2666 and was quite happy when I saw 2800 along with 2666. 2. Uncheck Maximum Memory. Another possible solution to increase RAM usage is to ensure that the ‘Maximum memory’ option in the System Configuration settings is unchecked: Right-click the Windows icon in the bottom left and select Run. Type MSConfig and click OK. Navigate to the Boot tab and click Advanced options. Click first button, "PCI Devices" and select "SMBUS Controller". Other option is to program an XMP profile which comes after the first 128 bytes but XMP will need to be selected in the BIOS. If external programming then any mistakes can easily be rectified by reprogramming and of course before doing any programming a backup of the SPD data New hardware was recently installed. If new hardware was recently installed in your computer, you may receive the prompt "Press F1 or F2 to enter setup". If you receive this message, the BIOS (basic input/output system) needs you to verify the configuration of your new hardware. Enter the BIOS setup, verify or change your hardware settings Step 3: Change your memory frequency to the desired amount. This one is self explanatory, all you really want to do is pick the RAM stick you want to change the frequency for, and change the frequency to something that fits your needs. The dropdown menu available gives you all the possible preset frequencies, so it’s really just a matter of If you increase the RAM memory GPU shared memory will be increases. That pre allocated VRAM you can opt from the BIOS settings of your laptop but not all the laptop manufacturer allows you to change these settings in the BIOS settings this you must check with the laptop manufacturer only. In this case AMD APU has nothing to do its completely Untuk opsi navigasi BIOS tertentu, hubungi produsen sistem. Di dalam BIOS, tekan F7 untuk masuk ke Mode Lanjutan. Buka Boot\CMS (Modul Dukungan Kompatibilitas) dan nonaktifkan opsi ini. Buka Konfigurasi Penyimpanan Advanced\PCH dan atur pengaturan Mode SATA ke Intel RST Premium dengan Intel® Optane™ System Acceleration (RAID) Tekan F10 untuk See how you can set BIOS to allow the computer to boot from the USB Drive on the Dell Optiplex computer.Do you need to boot Windows Installation from the USB z5cKw3W.